WPC – Baker STYLE Equalizing Assemblies

B-Choke Assemblies
BKO EQUALIZING BOTTOM

B Choke – Assemblies

Purpose:

To provide restriction of flow in gas wells, controlling/eliminating hydrates and sand bridges from forming further up well

Specifications:

  • Choke bean available with packing and back-up rings instead of o-rings.
  • Available in different no-go sizes as requirement.
Separator
G-Equalizing Assemblies
G EQUALIZING ASSY. w/o LOCK BODY

G Equalizing – Assembly

Purpose:

This is the equalizing portion of Baker Style blanking plug (Locking Mandrel), designed to hold pressures from above and below when the G Equalizing assembly is assembled with the corresponding S, W or Z locking mandrel, depending on configuration and the landing profile to be set into will plug determine configuration.

Specifications:

  • There are 2 types of fishneck prongs. #1 assembled with W and Z locking mandrels and #2 to be assembled with S locking mandrels
  • Standard packing is Nitrile-Kevlar & Moly-glass with other types available on request

WPC – Otis STYLE – EQUALIZING ASSEMBIES 

A Choke Assembly w/ KOBES

A Choke – Assembly

Purpose:

To limit flow to a predetermined production volume while leaving the ability to pump chemicals down the tubing if required. Assembly used in conjunction with X,XN,R,RN locking mandrels. *viewed under WPC Products – Locking mandrels

Specifications:

Choke bore drilled to customer specification.

Separator

P-EQUALIZING ASSEMBLY (STANDARD)

P Equalizing – Assembly

Purpose:

Equalizing assemblies are designed in part with Locking mandrels to hold pressure differentials from above or below plug within well bore.  by attaching to a X/XN & R/RN locking mandrels.

Specifications:

P Equalizing Assembles – corresponding lock mandrels.
Parts #1 and #2 are interchangeable.

WPC Assembly videos illustrations and relative information    below

Separator
WPC logo

T Style Choke – Assembly *not shown

Purpose:

This equalizing assembly allows gases to flow thru Otis style X,XN,R & RN locking mandrel (assemblies) allowing continuous flow upward toward surface line at a controlled rate thru pre-sized orifice. The T style choke can also be configured to prevent flow upward toward surface line while still providing the option to pump down wellbore. Note: Kobes plugs available in the cases that the orifice becomes restricted, creating undesired pressure differentials.

Specifications:

Kobes plug is optional.